The real testing data show that ,RUSTOPER®VCIrus®VCI antirust products don't affect the electrical or electronic components. Actually corrosion inhibitor will help improve the stability of them, protect them from corrosion. Definitely you can use RUSTOPER®VCIrus®VCI antirust package safely.

The time depends on the volume of the package as well as the ambient temperature. When the corrosion inhibitor molecules adhere to the metal surface, then protection effects and the gasification molecule achieves saturation equilibrium in the space, at this moment the protection effect reach to the maximum.

We put steel plate in ESCA and observe it. All traces of the molecular layer of corrosion inhibition disappeared from the surface of the component. That steel plate was taken out from RUSTOPER®VCIrus®VCI package between 2 to 4 hours.

The rate of corrosion occurs, depending on the cleanliness of the component surface and the surrounding environment (such as relative humidity, contamination or wood, temperature, etc.)

When moisture components in the … package. Will be occur some corrosion accordingly. The degree of corrosion depends on the corrosion inhibition of the molecule in a confined space to achieve saturation of the duration of time. PH of water and degree of water contaminated.

RUSTOPER® can slow down the corrosion process, prevent the further development of corrosion, but it cannot remove the corrosion has been produced.

According to anti corrosion design, Some rust proof packaging products is produced by low density polyethylene and high density polyethylene master batch, And to a large scale, it is resistant to moisture penetration. It is expected that some of the water in the atmosphere inevitably enters the sealed package during transportation, since stop by high moisture zone.

It will be influenced by phase corrosion inhibitor, when the water is penetrated through the plastic packaging products containing RUSTOPER®VCIrus®VCI corrosion inhibitor (rigid and flexible). In the case of low content of moisture through plastic packaging, RUSTOPER®VCIrus®VCI antirust products can still prohibit corrosion, When water entering a RUSTOPER®VCIrus®VCI antirust packaging of products smoothly(For example, improper packing or packing on a significant hole).corrosion will occur.

While there is a visible hole in package. The molecular protective layer formed on the metal surface by RUSTOPER®VCIrus®VCI corrosion inhibitor will escape and leak, so it is necessary to avoid the obstruction of the air flow into the package.